Published August 26, 2026 at 02:32
A logger that has travelled with a delivery contains thousands of readings. On arrival, almost none of them matter. The question to be answered at the loading bay is binary: did it stay within limits, yes or no?
Answering that question normally requires a computer, a cable, a program and a few minutes — for a delivery that is completely fine nine times out of ten. This logger answers instead with a single LED.
What it is
ETI ThermaData Lite — a standalone temperature logger in a water-resistant polyethylene housing.
- Two LED indicators: a button press gives green if the limits were held and flashing red if they were exceeded
- Programmable high and low alarm limits
- Logging interval from 6 seconds to 255 minutes
- Delayed start of up to 23 hours and 59 minutes, plus start by button press, temperature or time of day
- User ID of up to 31 characters, °C or °F, USB-C connection
- Password-protected calibration adjustment, ±3 °C in steps of 0.1 °C
- Available in several colour-coded housings — blue, yellow, white and black
- Free reporting software
Why a yes or no is enough
The decision on receipt isn’t an analysis, it’s a sorting. Either the delivery is accepted or it isn’t, and no curve is needed for that. Only when the answer is red does the history become interesting — then you want to know when it happened, for how long and by how much, since that determines whether the goods are lost or simply need to be prioritised.
Being able to determine that with a single button press out on the loading bay, in the rain, wearing gloves, is the difference between a check that is done on every delivery and one that’s done whenever someone has time.
The start conditions determine whether the data is usable
Most failed logging runs fail at the start, not during transport. A logger that starts as soon as it’s programmed fills its memory with hours of office temperature before the goods are even packed. A logger that has to be started manually at departure sometimes doesn’t get started at all.
That’s why there are four ways to start: a delayed start of up to a full day, start at a set time, start when the temperature passes a threshold — in other words, when the goods have actually been chilled — or start with a button press by whoever is packing. The choice between them isn’t a detail: it’s what determines whether the measurement series describes the transport or something else.
Two details that are more thought-through than they look
The colour of the housing is a hygiene measure. By assigning a colour to a product group or a zone, you can immediately see if a logger has ended up in the wrong place — the yellow one belongs to the raw material, the white one to the finished product. It’s cross-contamination control implemented as a colour choice, and it works precisely because it doesn’t require anyone to read anything.
That the calibration adjustment is password-protected is no accident. A function that can shift the reading by up to three degrees is powerful in the right hands and dangerous in the wrong ones: whoever can adjust the instrument can, in practice, turn a failed delivery into a passed one. That it sits behind a password shows the manufacturer has thought through who should be able to do what.
Three typical use cases
- Transport: one logger per pallet, read with a button press on arrival.
- Chilled and frozen storage: simple monitoring where the alarm limits are what matter.
- One-way shipments: where the equipment doesn’t come back and the price per unit is therefore decisive.
Why it pays off
The cold chain is rarely documented because someone wants curves. It’s documented so responsibility can be placed, and so goods aren’t discarded unnecessarily when no one can show what happened.
A logger that costs little enough to be shipped with the goods, and that answers the most important question without even being connected to anything, means the check can cover everything instead of spot checks. And a check that covers everything is the only thing that can show that this particular delivery was in order.