Published 16 November 2026 at 06:54
A pallet of electronic components arrives with moisture stains on the cartons. The carrier claims the load was handled correctly, the supplier says it left the warehouse in good condition, and nobody can show what happened along the way. Without measurement data it becomes one party’s word against another’s, and the cost often falls on whoever has the weakest evidence.
What the HumidityPod is
ETI HumidityPod is a compact USB logger that measures temperature and relative humidity. It measures -25 to 85 °C and 0 to 99 %RH, with an accuracy of ±0.5 °C and ±3 %RH within the specified range. The logger stores up to 10,000 readings, split into 5,000 for temperature and 5,000 for humidity. It measures 76 × 26 × 14.5 mm, weighs 26 g and has an IP65 enclosure rating, meaning protection against dust and water splashes. It is powered by a CR2032 battery.
The problem it solves
Many loggers require software, licenses or a computer with the right installation before you can even read out the data. As a result, measurement is often skipped in practice. The HumidityPod is set up with two buttons on the front, and a flashing green LED shows that logging is in progress. When it is then connected to a computer via USB, a PDF report is created automatically. No installation, no login, no export function to hunt for.
When and why it is used
The logging interval can be set between 6 and 255 minutes. With the shortest interval the memory lasts a little over three weeks, and considerably longer with longer intervals. This suits monitoring conditions over an entire transport or storage period, rather than capturing rapid changes. It is therefore a documentation tool: did conditions stay within the limits, yes or no.
Three use cases
Transport of moisture-sensitive goods. Place a logger in the load with electronics, paper or building materials. On receipt, connect it, open the PDF and see right away whether the humidity or temperature deviated during the journey.
Warehouses and storage rooms. In an uninsulated warehouse or storage building, the climate varies with the season and weather. A logger on the shelf shows whether there is a risk of condensation, corrosion or mold before the damage is visible on the goods.
Food production and packaging. Dry goods, spices and packaging materials are affected by humidity. The logger can be placed in the storage area or travel with a shipment, and the report becomes documentation for quality reviews.
Why it pays off
The value lies not in the logger, but in what it prevents. A single complaint case, a rejected delivery or a dispute over liability normally costs more than several loggers. Because the report can be read without special software, the recipient, the freight forwarder or the auditor can also check the result independently. This saves time at every stage, and measuring becomes routine instead of the exception.
If you need to document the climate in transport or storage, you can read more about the HumidityPod with us.