Published 20 November 2026 at 07:46
The oven shows 90 °C, the cold room shows 4 °C, and it is still uncertain what happened inside the product. Anyone who has worked with hot holding, chilling or heat treatment knows that the air temperature and the core temperature seldom follow each other. When someone later has to prove that a batch actually stayed at the right temperature, a handwritten line on a piece of paper falls short.
What it is
The ETI ThermaData in stainless steel is a standalone temperature logger with a Ø4.5 x 200 mm penetration probe. The housing is made of food-grade 316 steel and is sealed to IP66/67, so it withstands moisture, cleaning and impacts. The measuring range is -20 to +125 °C with a resolution of 0.1 °C and an accuracy of ±0.5 °C. The logger connects via USB-C under a screw cap, and it is programmed in ThermaData Hub.
What problems it solves
The logger replaces manual spot checks with an unbroken curve. You choose an interval from 1 second to 255 minutes, and the memory holds 16,000 readings. You can also set high and low alarm limits, a delayed start, and a user ID of up to 31 characters to label the measurement. After download, an automatic PDF summary is created that can be saved directly in the quality system. If you need formal documentation, a three-point UKAS certificate is available at an additional cost.
When and why it is used
It suits situations where the temperature of the product is what needs to be documented, and where the measurement runs longer than anyone can stand and watch it. The probe is inserted into the product, the logger follows along through the process, and the data is read out afterwards.
Three areas of use
Food production. Chilling cooked batches is a classic example. The curve shows how long it took to pass through a critical temperature range, not just what the cold room displayed.
Pharmaceuticals and laboratory. Heating cabinets, drying ovens and hot storage can have temperature differences between shelves. A logger with the probe placed in or next to the sample shows what the sample is actually exposed to.
Transport and receiving. The probe can travel with a shipment of chilled or frozen goods. Upon unloading, you can see whether the product stayed within the limits throughout the journey, which helps with complaints.
The economic argument
The cost of a logger should be weighed against the time spent on manual reading and record keeping, and against the risk of discarding an entire batch because documentation is missing. A single deviation that cannot be substantiated can cost more than the instrument itself. Since the logger is built to withstand washing and humid environments, it also holds up to daily use in production.
If you want to see all probe options and specifications, you will find them on the product page: ETI ThermaData in stainless steel with insertion probe.