Published 18 November 2026 at 12:34
Many people have stood in front of a furnace in the morning and seen that the display shows the right temperature right now, while no one knows what happened during the night. The controller shows the setpoint, but not whether a door was left ajar, whether a probe drifted, or whether the heating took twice as long as usual. It then helps little that the control system looked fine when you arrived.
What it is
The TandD 56-TR75A2 is a thermocouple logger with two channels. It handles types K, J, T, E, S and R, and the measuring range goes from -199 to +1760 °C depending on which thermocouple you connect. The probes are not included, but are connected to the screw terminals on the back. The logger connects to your WiFi on its own, including WPA2-Enterprise, and uploads measurement data over encrypted HTTPS to T&D WebStorage. The memory holds 30,000 data points, so nothing is lost if the network goes down for a while.
What problems it solves
It gives you an independent measurement chain alongside the process’s own control. You see the curve over the entire sequence, not just a momentary value. Two channels let you compare two points, for example furnace chamber and workpiece, or inlet and outlet. The cold junction compensation is ±0.5 °C, and the accuracy for types K, J, T and E is ±(0.5 + 0.003 × t) °C, excluding the probe itself. For types S and R it is ±(1.5 + 0.003 × t) °C.
Three use cases
In a workshop with hardening furnaces, type K is used to document that each batch actually held its temperature and time. The curve becomes evidence in the event of a complaint or audit, and you avoid copying down values by hand.
In the glass, ceramics and metal industries, types S and R are the ones that apply, since they reach 1760 °C. Few WiFi loggers can handle those temperatures. Here it is often deviations in the heating ramp that explain quality problems after the fact.
In maintenance and process monitoring, the logger is placed at a furnace or a hot water system that is difficult to reach. Alarms arrive via the web service, and you check the curve from the office. The logger also has Vaccine Mode, which records max and min based on logged data, which is useful if the same equipment is also to monitor temperature-sensitive storage.
Why it pays off
Calculate what a ruined batch costs in material, machine time and redelivery, and compare it with a logger. A single deviation caught while it is happening can justify the entire investment. In addition, the manual reading rounds disappear, and the documentation is collected and time-stamped. Configuration is done via Bluetooth and the T&D Thermo app, so installation takes little time even without IT support.
Keep in mind that the thermocouples are purchased separately. Choose the type according to temperature range and environment, and you get a logger that suits your particular process.