Published 14 October 2026 at 09:16
You open the cold room on Monday morning and the display shows 4 °C. Everything looks normal. But the compressor may have stopped for several hours on Sunday, and an ordinary thermometer tells you nothing about that. It is exactly this uncertainty that often makes self-inspection a judgment call rather than a measurement result.
What the ThermaGuard 101 is
The ThermaGuard 101 is a digital fridge and freezer thermometer from ETI with two probes. The external probe is waterproof and sits on a two-metre cable, so you can place it inside the fridge or freezer while the unit itself hangs outside. The external probe measures from -39.9 to 49.9 °C. The internal probe measures the room temperature, from -19.9 to 49.9 °C. Accuracy is ±0.4 °C and resolution is 0.1 °C.
What problems it solves
The large display shows the current temperature and the recorded max and min values at the same time. You can therefore see right away whether the temperature has left the permitted range since the previous reading. The thermometer also has programmable alarms for high and low temperature. The audible signal sounds when the value falls outside the limits you have set, for example above +5 °C in the fridge or above -18 °C in the freezer. The thermometer complies with EN 13485, which makes HACCP documentation easier.
How it is used in practice
In a commercial kitchen environment, the unit hangs on the cold room door with the probe placed among the goods. On the morning round you check the max value instead of guessing whether the night went well.
In shops and warehouses, the probe is placed in the freezer display, where the room temperature from the internal probe provides a useful comparison when the cooling load varies with the season.
In laboratories and sample storage, fridges containing reagents or samples are monitored. There is also an optional two-point UKAS calibration certificate at -18 and 0 °C, which applies to the external probes and provides traceability during audits.
Why it pays for itself
The difference between an alarm and a discovery after the fact is often an entire load of frozen goods. A single discarded batch can cost more than the thermometer. On top of that comes the cost of not being able to show during an inspection that the temperature has been maintained. Battery life is also long: 25,000 hours of normal use without alarms, which corresponds to replacing the AA batteries roughly every 34 months. The housing is splash-proof according to IP54, so it withstands a kitchen or warehouse environment.
The ThermaGuard is not a data logger with curves, but a simple, clear instrument that makes the inspection round reliable. For many operations, that is exactly the level that is needed.