Published 12 October 2026 at 14:56
It is a familiar situation: an audit is approaching, and someone needs to show that a batch actually held the right temperature throughout the heat treatment. The ordinary plastic logger can’t handle steam, high-pressure washing or 100 degrees, so you fall back on hand-written values and a thermometer that someone remembered to read now and then. That leaves no curve, and the curve is what proves something.
What it is
The ETI ThermaData Pro is a temperature logger in food-grade 316 stainless steel with an IP66/67 enclosure rating. It measures from -20 to +125 °C with 0.1 °C resolution and an accuracy of ±0.5 °C, and stores 16,000 readings. You program it via ThermaData Hub: logging intervals from 1 second to 255 minutes, delayed start, start on temperature or time, and upper and lower alarm limits. The connection is a USB-C connector under the end cap, and the software creates a PDF summary automatically.
What problem it solves
It can be placed where the temperature is actually critical, not just nearby. The logger is available without a probe or with a penetration probe (Ø3.3 x 50 mm and Ø4.5 x 100, 150 and 200 mm) for measuring inside the product. There is also a fast-response probe, Ø1.8 x 20 mm, for situations where the ambient temperature changes quickly. The housing withstands impacts, moisture and corrosion, so it survives the cleaning that destroys simpler equipment.
Three areas of use
Food production. With a penetration probe in a product, you get the core temperature throughout the entire cooking or cooling process. The PDF report can be added directly to your HACCP documentation.
Dishwashers and cleaning processes. The fast-response probe is suitable for verifying that the rinse water actually reaches the temperature the requirement specifies, and for how long. The logger can travel through an entire cycle.
Pharmaceuticals and heat treatment. Where processes reach up to 125 °C, you need a logger that withstands both the heat and the moisture. If traceability is required, you can order a UKAS 3-point certificate as an option.
Why it pays off
The cost of a logger should be weighed against the cost of a rerun or scrapped batch, or a deviation that can’t be defended because data is missing. The logger replaces manual readings, provides a continuous curve instead of isolated points, and can be reused for many years, since the housing is built to be washed. It also saves time: programming and downloading take a few minutes, and the report is generated without any rework.
If you need to measure in environments where ordinary loggers give up, the stainless steel ThermaData Pro is a practical choice. Choose the probe length according to what you will be measuring in.