Published 1 July 2026 at 13:26
In recent years, indoor climate has gone from being a comfort issue to a documentation issue. Schools require continuous CO₂ measurement to comply with EU directives and national guidelines. The pharmaceutical industry works under GMP requirements stating that temperature, humidity and CO₂ must all be logged and available for presentation during inspections. Offices measure to understand why employee productivity dips after lunch. All three parameters are connected, and all three need to be measured at the same time for the results to be meaningful.
Why three parameters in one logger
The CO₂ level in a room is a direct proxy for how many people are there, how long they have been there, and how well the air is being exchanged. Temperature tells you about the heat balance of the ventilation system. Humidity reveals the risk of mold and condensation. None of the measurements is complete without the other two: 25 °C and 60 % RH is pleasant summer air, but 25 °C and 60 % RH with 1,800 ppm CO₂ is a room where people can’t think clearly.
What the high-precision model adds
TandD TR-76UI-S is the high-precision variant in TandD’s 3-in-1 series. The difference from the standard model lies in the probe: the SHA-3151 measures temperature and humidity with an accuracy of ±0.3 °C and ±2.5 %RH respectively, over a wider range (-20 to +70 °C, 0–99 %RH). For a GMP installation, a climate chamber for cell culture or a stability study, the extra accuracy is not cosmetic. It is the requirement specification.
The CO₂ sensor is of the NDIR type (Non-Dispersive Infrared) with built-in pressure compensation. It is the only sensor technology that stays stable over time; cheaper electrochemical CO₂ sensors drift out of calibration within months, while NDIR sensors remain within specification for years.
Where the logger makes a real difference
Schools and preschools: National guidelines and Arbetsmiljöverket (the Swedish Work Environment Authority) recommend that CO₂ should not exceed 1,000 ppm in teaching spaces. Continuous measurement quickly reveals which classrooms lack adequate ventilation, and it provides concrete evidence when the principal needs to raise the issue with the property owner.
Offices and meeting rooms: The link between CO₂ levels above 1,400 ppm and reduced cognitive performance is well documented. HR and facility departments use indoor climate logging to justify investments in better ventilation, because measurement data beats guesswork.
Pharmaceutical production and cleanrooms: GMP-validated areas require documented monitoring of all three parameters with traceable calibration. The TR-76UI-S’s USB readout and 8,000 data points integrate directly into validated systems.
Cell culture and biotechnology laboratories: Incubation chambers with added CO₂ (typically 5 %) need precise control, since operating deviations kill samples. An external relay output lets the logger control an alarm or a safety valve.
Museums, archives and libraries: Climate control of collections depends on all three parameters at once. A logger that simultaneously monitors the risks of desiccation, condensation and airborne contamination protects cultural treasures better than three separate instruments.
What you get
Built-in NDIR CO₂ sensor (0–9,999 ppm with pressure compensation), external high-precision probe for T/RH, 8,000 data point memory, USB 2.0 readout, external relay output for an alarm or controller, and operation on a single AA battery. It is as easy to install as a simple thermometer, but with enough evidence to satisfy an auditor or inspector.
Read more: TandD TR-76UI-S CO₂/T/RH logger (high-precision model) in the shop →