Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The air in the fridge doesn’t show the temperature of the vaccineThe Air in the Fridge Lies: How to Monitor the Real Temperature of Your Goods Without False AlarmsHow to show in seconds whether the load stayed at the right temperature and humidity during transportThe air feels heavy long before anyone measures it: how to make carbon dioxide levels visibleThe freezer showed -18 °C on Monday morning, but what happened over the weekend?The core temperature is what counts, and it only shows if someone has logged itTwo measuring points and the difference between them: how to make the temperature differential in a process visibleFour Measuring Points and a Time-Stamped Log Show Where the Heat in the Process Actually GoesYou Can’t Guess the Core Temperature of a Product: How to Document It Without Standing Next to ItThe fridge looked like it was holding the right temperature, but what happened overnight?Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The air in the fridge doesn’t show the temperature of the vaccineThe Air in the Fridge Lies: How to Monitor the Real Temperature of Your Goods Without False AlarmsHow to show in seconds whether the load stayed at the right temperature and humidity during transportThe air feels heavy long before anyone measures it: how to make carbon dioxide levels visibleThe freezer showed -18 °C on Monday morning, but what happened over the weekend?The core temperature is what counts, and it only shows if someone has logged itTwo measuring points and the difference between them: how to make the temperature differential in a process visibleFour Measuring Points and a Time-Stamped Log Show Where the Heat in the Process Actually GoesYou Can’t Guess the Core Temperature of a Product: How to Document It Without Standing Next to ItThe fridge looked like it was holding the right temperature, but what happened overnight?

TandD TR45 Bluetooth Logger for K/J/T/S/R Thermocouples + Pt100/1000: When a Single Logger Covers -199 to +1760 °C Depending on the Probe You Screw into the Back

Published 13 July 2026 at 13:38

A standard TandD, ETI or Extech logger has a built-in thermistor or Pt sensor with a fixed measuring range: typically -40 to +80 °C, sometimes extended to +125 °C. This covers 95% of commercial applications: refrigerators, freezers, vaccine transport, HVAC, greenhouses and archive monitoring.

The remaining 5% is where problems arise. Oven processes in the confectionery industry (+250 °C), autoclave sterilization in healthcare (+134 °C), stainless steel annealing (+400 °C), heat treatment in tool manufacturing (+800-900 °C), plastic extruders (+300 °C), foundries (+700-1600 °C), platinum freezing-point calibration (-38 °C to +962 °C): NONE of these work with a fixed, built-in thermistor.

The TR45 solves the problem by leaving the choice of sensor OPEN. On the back there are screw terminals where you physically connect the type of sensor that suits your application.

Five thermocouple types, one measuring range

Thermocouples work through the Seebeck effect: two dissimilar metals welded together at one point generate a voltage proportional to the temperature difference between the weld point (measuring junction) and the reference point (cold junction, typically in the logger). The TR45 supports five standardized thermocouple types:

  • Type K (Chromel-Alumel): -199 to +1370 °C. The most common. ~41 μV/°C. The standard choice for workshop processes, furnaces and exhaust gases.
  • Type J (Iron-Constantan): -199 to +1200 °C. ~55 μV/°C, a higher signal than K. Preferred in vacuum and reducing environments (Chromel oxidizes in oxygen-poor atmospheres).
  • Type T (Copper-Constantan): -199 to +400 °C. ~43 μV/°C. Best accuracy at low temperatures. Preferred for cryogenic applications and freezer storage monitoring.
  • Type S (Pt/PtRh10): -50 to +1760 °C. ~10 μV/°C, a low signal. Extreme stability and accuracy at high temperatures. The standard for foundries, glass furnaces and ceramic firing.
  • Type R (Pt/PtRh13): -50 to +1760 °C. Very similar to S, with a slightly higher signal. Preferred in some reference calibration applications.

Standard practice is to buy the thermocouple separately (cable length, tip design and insulation material vary by application). Cost: SEK 200-800 for a K thermocouple, SEK 3,000-8,000 for an S or R Pt/PtRh element.

Pt100/Pt1000 with a 3- or 4-wire interface

Pt100 (100 Ω at 0 °C) and Pt1000 (1000 Ω at 0 °C) are platinum resistance thermometers. They work because the resistance of platinum varies linearly with temperature (α = 3.85 × 10⁻³ Ω/Ω/°C according to IEC 60751).

Advantages compared with thermocouples:

  • Better accuracy: ±0.03 to ±0.1 °C (Class A) versus ±1 to ±2 °C for thermocouples.
  • Better long-term stability: 0.05 °C drift per year versus 0.5-2 °C for thermocouples.
  • No cold-junction compensation needed.

Disadvantages: The measuring range is limited to -199 to +600 °C (the melting point of platinum is +1768 °C, but industrial use stops at +600 °C).

A 4-wire interface (Kelvin connection) eliminates the cable resistance errors that otherwise limit a 2-wire Pt100 to ±0.5 °C accuracy over longer cable lengths. The TR45 supports both 3- and 4-wire connections, configured via the T&D Thermo app.

Bluetooth 4.2 Low Energy instead of WiFi

Many modern loggers use WiFi (ETI ThermaData WiFi, TandD RTR500 series). WiFi has the advantage that data is pushed to the cloud, allowing monitoring from any location.

But WiFi also has drawbacks for this type of logger:

  • Battery consumption: A WiFi radio draws 100-200 mA when transmitting. Battery life is 1-3 months.
  • Requires a WiFi network: it does not work in environments such as furnaces, foundries and containers in transit.
  • Configuration: SSID, password and MAC address management.

The Bluetooth 4.2 LE solution:

  • Battery consumption of ~1-3 mA during measurement. Battery life of ~1 year on an LS14250 lithium cell.
  • No infrastructure needed: connect directly to your phone when you are within 10 m range.
  • No configuration: pairing is done via the app.

Practical consequence: The TR45 is intended for spot measurements where someone physically comes to read it (a workshop technician making rounds, an oven operator checking batch status), not for continuous remote monitoring from the office.

Memory and logging intervals

16,000 data points of memory. 15 fixed logging intervals from 1 sec to 60 min:

  • 1 sec interval: 4 hours of continuous logging.
  • 10 sec interval: 44 hours.
  • 60 sec interval: 11 days.
  • 10 min interval: 111 days.
  • 60 min interval: 666 days (almost 2 years).

Recommendation: for oven processes (60-180 min per batch), use a 10 sec or 30 sec interval. For calibration verification, use a 1 sec interval (it clearly captures the melting plateau).

Applications

Workshop processes: annealing and hardening: A type K thermocouple documents the temperature profile during the heat treatment cycle. Critical for aerospace-approved hardening (AMS 2750E).

Bakery and restaurant industry: oven verification: A type K thermocouple inside the baked product provides provable internal temperature for HACCP documentation.

Pharmaceutical industry: autoclave cycle verification: A type T thermocouple (better accuracy in the +121 to +134 °C range) validates the sterilization cycle.

Calibration labs: Pt100 fixed point: Pure ice point (0 °C ice water), gallium freezing point (+29.7646 °C) and indium freezing point (+156.5985 °C) for Pt100 reference calibration.

Glass and ceramic firing: A type S thermocouple for 800-1400 °C applications where a type K would be corroded by oxidation.

Scientific research: wide temperature range: Switch between several sensor types on the same logger without having to buy more instruments.

Engine and machine development: exhaust temperature: A type K thermocouple in the exhaust pipe.

Cold-junction compensation

A thermocouple measures a TEMPERATURE DIFFERENCE, not an absolute temperature. The TR45 contains a Pt reference sensor inside the logger that measures the cold-junction temperature and automatically compensates the reading.

Important to know: the cold-junction reference is sensitive to rapid changes in ambient temperature. If the logger is moved from a +20 °C storage room to +40 °C workshop air, it takes ~15 min for the internal reference to stabilize. During the stabilization period, readings may deviate by 0.5-1.5 °C. Good practice: let the logger sit in the measuring environment for 15-30 min before starting an important measurement.

What you get for your money

TandD TR45 Bluetooth logger (BT 4.2 LE), 1 measuring channel (K/J/T/S/R thermocouple via screw terminals or Pt100/Pt1000 3-/4-wire), measuring range -199 to +1760 °C depending on the sensor, 16,000 data points of memory, 15 logging intervals (1 sec – 60 min), integrated LCD, battery life of approx. 1 year, T&D Thermo app for iOS/Android, report generation via TR4 Report. SEK 1,492. NOTE: The sensor is not included; it is purchased separately based on the application’s temperature range and cable length requirements.

The standard tool for temperature logging beyond the range of a standard thermistor: workshop processes, sterilization systems, calibration labs, glass furnaces and other applications where the measuring range goes above +125 °C or below -40 °C. The extra cost over a fixed-thermistor logger (SEK 500-1,200) is justified for any operation that needs more than a single fixed temperature range. Instead of buying 3-5 specialized loggers, one TR45 plus 3-5 different sensors is enough.

Read more: TandD TR45 Bluetooth logger in the store →

More news

All news